Showing posts sorted by relevance for query a-172. Sort by date Show all posts
Showing posts sorted by relevance for query a-172. Sort by date Show all posts

Monday, 1 August 2011

Patch Tips#16 - Analogue Logic



Using the A-172 Min/Max as a voltage limiter.



Today's Patch Tip is taken from this discussion on limiting the output of a Wiard Noise Ring. Self Oscillate's suggestion of using a min/ max module is a simple but ingenious solution that deserves re-posting. Not only can it be used to limit the level of a stream of CVs, applying a threshold in this manner can also clip audio waveforms, dynamically if desired.

"… feed the NR output to a max/min module, together with a fixed voltage which determines the highest allowed pitch. then use the min output. the higher notes will not exceed the fixed voltage, while the lower notes get through unchanged."

As Self Oscillate notes, the benefit of using a min/max module is that, unlike general attenuation, the lower CVs are unaffected. When applied to audio, this results in a 'squaring-off' of the waveform at a pre-determined level. Experiment with the A-172's outputs for positive and negative clipping.

I'd previously used the A-172 and Maths' OR output to trace the peak contour of two sources, but hadn't considered doing the reverse. Thanks to Self Oscillate for this useful application of fuzzy logic!

Sunday, 5 December 2010

Fonitronik mh31 VC Modulator

A look at the Euro-prototype of Fonitronik's unconventional ring modulator.



See this thread at the electro-music forum for the background to this project and Kevin Kissinger's excellent demo.

"Harry Bissell once recommended Irvine's design for a ring mod. I changed the resistors to our common values, and added two VCAs to the inputs, thus giving a voltage controlled ring mod. Makes a lot of fun."

Matthias's opening description in that thread might lead one to believe that this circuit is indeed just another ring modulator with the added benefit of voltage control, something akin to Doepfer's A-133 VC Polarizer. Irvine refers to his design as a 'frequency mixer' and, while I'm not sure of the the semantic difference, the sonic results certainly are unlike 'normal' RM.

Here's a comparison between the Cwejman VCO-2RM, the A-133 and then the mh31:

mh31a.mp3

The Cwejman and Doepfer (0:26) exhibit 'classic' RM, with the latter distorting at higher CV levels. The mh31 (0:54) produces a harsher, more metallic tone that, while having RM characteristics, doesn't yield the expected sine-on-sine bell-tone. Here's what the waveforms look like:



Irvine's circuit sums the inputs, then inverts, rectifies and doubles the amplitude of the sum. This offers a clue as to why this circuit sounds different. In the following example, I've modulated an audio signal with an LFO. Using a traditional DC-coupled RM, the amplitude is attenuated as the LFO nears 0V and is then polarized. To the ear, flipping the polarity of an audio signal should make no difference:

mh31b.mp3
(VCO-2RM, A-133 @ 0:11, mh31 @ 0:25)

This last clip highlights the difference in Irvine's approach. Rather than simply changing the polarity, at slow speeds, the waveform seems to 'change direction'. This reminded me of the type of soft sync that is implemented in some VCOs or mixing waveforms in a min/ max analogue logic module like the A-172. Here's what it looks like:



The term 'ring modulator' might be misleading, but that shouldn't detract from the possibilities of this circuit, both in terms of timbre and function generation. The build quality is excellent and, taken as an alternative to the classical DC-coupled ring mod, the mh31 offers new sounds and surprising results when processing control voltages.

Wednesday, 30 March 2011

Patch Tips #15 - Non-Linear Distortion



I recently stumbled across the Nord Modular's exponential shaper module while looking for something to bend a signal. The ShpExp works with transfer functions to generate non-linear distortion. This can give a sound edge, without totally shredding it. Of course, my next thought was whether it would be possible to patch something similar with my system. As usual, Rob Hordijk had the answer.



The trick involves generating a signal at twice the frequency of the source, which will then be used to modulate the amplifier. The easiest way to do this is to patch multiples of the source to both inputs of a ring modulator, effectively multiplying the signal by itself. This performs full wave rectification and, in the case of sine waves, frequency doubling. Patched to a linear VCA, a sine wave is bent like this:



Here's how it sounds:


Mono- then Duo-phonic signal. Clean Cwejman signal path (MMF-1 sine, VCO-2RM RM, VCA-2P)


Mono- then Duo-phonic signal. Dirty Doepfer signal path for added crunch (MMF-1 sine, A-133 as RM, A132-1 VCA)

Feeding the rectified, frequency-doubled signal back to the source, rather than the VCA, will bend the sine into a triangle, albeit with a different pitch. Try varying the FM-CV amount, other VCO waveforms or even polyphonic signals for seriously warped shapes.

I used the VCO-2RM and A-133 which, being dual, allows one to cascade and further multiply the modulator. Frequency doubling or rectification can also be achieved by feeding +ve & -ve signals to a min/max analogue logic module like the A-172 & Maths' OR processor or Doepfer's A-119 ext. input module, as per this Patch Tip. Like the A-133, Fonitronik's forthcoming mh31 and Makenoise's modDemix provide one-stop solutions.

I'm not sure if this process is in fact single-sideband modulation as the modDemix description suggests, but it's certainly closely related to Amplitude Modulation which will be the subject of the next Patch Tip.

Monday, 21 December 2009

Patch of the Day - Or What?

Ever wondered what else that OR socket on your Maths might be good for?



Today's Patch of the Day uses analogue logic to mix two sequences and then generate random pitch changes to an otherwise static sequence:

PotD - Or What ?  by  navs

In the first example, I manually adjusted the positive scaling of two sequences.

In the second take, I replaced one sequence with the stepped out of a Wogglebug. When the WB's output is higher than the sequence, a random note is added to the output.

If you've patched the ADSR example from the Maths manual, you might have realized that the OR output is a positive-CV-only maximum selector, similar to half of Doepfer's A-172 Maximum/ Minimum Selector. Unlike digital (binary) logic which only has two states, given a mix of CV sources, the highest voltage will be output in the form of a peak-CV contour. As you can hear in the example below, this is very different to mixing/ summing CVs:



(A-172. Two LFOs, summed mix, then max & min outputs)

Doepfer's Min/Max has the advantage of being able to process both positive and negative voltages and can be used to generate odd waveforms. See the product page and manual for more ideas.

Friday, 17 February 2012

PotD - Return of the PLL Arabesque

Using a min/max analogue logic module as a phase comparator. Inspired by dougcl's classic PLL patches (1, 2) and this post by Giftnudel.



PLLs seem to be a hot topic again. The jury is still out on whether they're used in the Buchla 259. Make Noise and WMD have announced PLL-equipped VCOs. They form part of the Wogglebug's chaotic heart and can be heard sputtering in the Hertz Donut's bad tracking modes.

I'd read about the inner workings of Doepfer's A-196 and PLLs in general in Horowitz/ Hill's Art of Electronics, but only just tried Giftnudel's patch. The A-196 employs a linear VCO, but as you can hear, the patch works just as well with standard, exponential VCOs:


minmax-pll (master left, slave right)

Two VCOs are compared in a min/max module like the Doepfer A-172. The minimum signal is subtracted from the maximum and the difference fed back to the 'slave' via a slew limiter, thus generating a CV. Depending on the initial frequency difference between the two VCOs and the lag time, you can imitate the wonderful glitches made famous by dougcl.

One nice thing about using this method over traditional sync is that it doesn't affect the sound of the slave as much. The other is that the slew limiter offers control over how well, or poorly, the oscillator tracks.