Pinch and a Punch for the 1st of the Month

My server is down and, with it, most of my content.

Hopefully back up soon!

4MS VCAM & PEG Demo

I got a chance to play with the prototypes of the 4MS VCA Matrix & Pingable Envelope Generator this past week while Dann & Jeannot were visiting Berlin. As the layout & features of both modules might change, I won't go into detail. Here's a quick, uncommented, run-through:

4MS VCAM & PEG Demo by navs

The VCAM works as you'd expect: it's a matrix mixer with the added benefit of SSM VCAs & mutes, capable of processing both CVs & audio. The LED mute buttons, in particular, would be useful in performance.

The PEG offers tempo-sync'd envelopes/ LFOs with control over multiplication or division of the envelope time, contour shaping tools and various trigger outs. With a little feedback and when run at audio-rates it can produce chaotic results.

Thanks to Dann for bringing them round - looking forward to the final versions!

Release: Trans Europa Exzess

Studio version of my set at the Schneidersbuero Superbooth event at the Saasfee Pavillion last week.


I took a 6U system to Frankfurt, which was the same rig I used for the above recording: 4MS RCD + breakout, Analogue Solutions MX224 & SH-NZ, Cwejman RES-4, MMF-1 & VCA-4MX, Doepfer A-133, Makenoise Wogglebug & Maths, Plan B M15 & M12, Toppobrillo Sport Modulator & Triple Wavefolder and, of course, the EHX Stereo Memory Man w/ Hazarai.



This was the first time I received the full security check the airport, involving a visit to a special room and swab test on the case. A tip for modular travelers: when asked whether you are a DJ and your equipment is a mixer, answer 'yes' to both questions.

Thanks to Andreas and all involved - it was a great evening!

TransEuropaExzess

A heads-up about Schneidersbuero's Superbooth tour, TransEuropaExzess, which kicks off with a special evening event during the Musikmesse next week in Frankfurt.



Look forward to the new Modular Merry-Go-Round, drinks and live performances from 4ms and others at the Saasfee Pavillion on Thursday, 7th April from 9 p.m.

More details about the Superbooth here.

Patch Tips #15 - Non-Linear Distortion

I recently stumbled across the Nord Modular's exponential shaper module while looking for something to bend a signal. The ShpExp works with transfer functions to generate non-linear distortion. This can give a sound edge, without totally shredding it. Of course, my next thought was whether it would be possible to patch something similar with my system. As usual, Rob Hordijk had the answer.



The trick involves generating a signal at twice the frequency of the source, which will then be used to modulate the amplifier. The easiest way to do this is to patch multiples of the source to both inputs of a ring modulator, effectively multiplying the signal by itself. This performs full wave rectification and, in the case of sine waves, frequency doubling. Patched to a linear VCA, a sine wave is bent like this:



Here's how it sounds:


Mono- then Duo-phonic signal. Clean Cwejman signal path (MMF-1 sine, VCO-2RM RM, VCA-2P)


Mono- then Duo-phonic signal. Dirty Doepfer signal path for added crunch (MMF-1 sine, A-133 as RM, A132-1 VCA)

Feeding the rectified, frequency-doubled signal back to the source, rather than the VCA, will bend the sine into a triangle, albeit with a different pitch. Try varying the FM-CV amount, other VCO waveforms or even polyphonic signals for seriously warped shapes.

I used the VCO-2RM and A-133 which, being dual, allows one to cascade and further multiply the modulator. Frequency doubling or rectification can also be achieved by feeding +ve & -ve signals to a min/max analogue logic module like the A-172 & Maths' OR processor or Doepfer's A-119 ext. input module, as per this Patch Tip. Like the A-133, Fonitronik's forthcoming mh31 and Makenoise's modDemix provide one-stop solutions.

I'm not sure if this process is in fact single-sideband modulation as the modDemix description suggests, but it's certainly closely related to Amplitude Modulation which will be the subject of the next Patch Tip.

New Releases on Bandcamp

Two collections of modular music for Spring:

ClubTransModular features material for my performance at the CTM.11 festival in February:





The Best of Patch of the Day, vol.2 is a collection of more of my favourites from the past year:



Both releases are available for €3+ each or €1 per track. Enjoy the sounds and thanks for your support!

Metasonix R54 Supermodule

Tracks like a zombie, but kicks like a mule - my first taste of yellow.



As Metasonix own video makes hilariously clear, you're never going to play Switched on Bach with the R54. Feed the Supermodule with the appropriate combination of CVs, however, and you can coax deep drums, watery plops, rubber basslines and tortured-animal sounds from this unruly, tube-based VCF/ VCO.

Metasonix R54 Supermodule by navs

Taming the R54 is complicated by some crafty normalization - both the audio and CV inputs also function as outputs. Silent Way failed to map a suitable set of voltages, but this is hardly surprising given the amount of slew of the vactrol-based inputs. I've found plugging every socket helps, typically a short trigger to the audio input and an offset, 'pitch' CV and short envelope to the rest.

The R54 is a wonderfully idiosyncratic oscillator and makes a great, if contrary, companion to the green in my system. While other VCOs might be a better choice for melodic lines, for low-end wobbles and percussive patterns the R54 is hard to beat.