Showing posts sorted by date for query feedback. Sort by relevance Show all posts
Showing posts sorted by date for query feedback. Sort by relevance Show all posts

Sunday, 5 November 2017

Thru-Zero FM Explainer

How to get the best results from your analogue thru-zero linear FM oscillator. An explainer in response to questions about the Doepfer A-110-4, but which is also applicable to other TZ-FM VCOs.



The A-110-4 seems to be more prone to pitching artefacts than other thru-zero (TZ) VCOs. That might partly be due to the specific design, but general considerations like the tolerances and sensitivities of analogue designs also play a role. Another issue might be perception, e.g. when certain modulation depths make it hard to discern the original pitch of the carrier.

DIGITAL FIRST

Ignoring the actual implementation (frequency- or phase-modulation), the reason digital FM is easy is because it’s clean. There are no DC offsets or pitch instabilities to ruin the result.

Here is an example using the Clavia Nord Modular G2. The carrier is always heard and only the modulator is enveloped. The frequencies of the two oscillators are fixed but the FM amount is manually increased: 01-TZ_clavia-digital

The carrier was tuned to B3 and the modulator D#5. I chose these pitches by ear to show an effect which might be confused for pitching at higher mod depths. When the modulation recedes, we get a sound similar to guitar feedback. This shows that it’s possible to find combinations of frequency relationships and modulation depths that will sound ‘wrong’ even when patched digitally. In an analogue system, frequency drift or tracking inconsistencies can worsen the problem.

DIRTY SIGNALS

But weird C:M ratios are not the main problem. The real enemy of dynamic linear FM is asymmetry caused by DC offsets. If the modulating wave is not centred about zero, the sound will churn. Here’s the same G2 patch, this time with some virtual DC offset added: 02-TZ_clavia-digital_virtual-dc-offset

To avoid this, some FM inputs are AC-coupled - the signal is filtered by a capacitor. But this is not a magic bullet. If the offset is large enough and being swept dynamically, the capacitor will have a hard time eliminating it. The most likely cause for DC offsets are the modulating oscillator itself, or more precisely its wave-shaping circuitry. I have had best results with Doepfer’s A-143-9 Quadrature sine-core oscillator.

SCIENCE, SWITCHES

Analogue TZ-FM involves switching to generate ‘negative frequencies’. No matter how finely timed, there is a moment of indecision which may be audible as a growl or rumble. DC offset makes this worse as it shifts the switching point. Lower initial frequencies (aka Bias, Symmetry or LFreq) allow more modulation and brighter sounds, but the cost is lower accuracy and more ‘bum notes’.

THE A-110-4

The Doepfer TZ-VCO switches between two oscillators. This method has pros and cons. If the two VCOs do not respond equally to modulation, the resulting FM will sound ‘off’, even if the modulator is clean and the switching point is accurate. This cannot be trimmed by the user. To mitigate pitching artefacts at the point of switching, calibrating the TZ transition can help.

WHAT IS IT?

As Cynthia Webster says in her humorous video showing the difference between thru-zero and normal linear FM, without TZ “half the modulation is gone”. As you’ll hear, the frequency relationship between carrier and modulator also plays a role.



The first VCO you hear in the next two examples is the Zeroscillator, then the A-143-9 which I have modified for standard linear-FM.

If the carrier’s initial frequency is high enough and/or the modulator is higher in frequency than the carrier, the tonal result is very similar:
03-TZ-high-initial-freq_ZO-A-143-9

The real difference between thru-zero and normal linear FM is apparent when the modulator is slower. As you can see above, instead of adding gentle folds, the modulator pushes and pulls the carrier through zero. TZ allows deep levels of modulation, even when the carrier’s initial frequency is low. When this is the case, there is a big difference between normal and TZ linear FM in the possible tonal result: 04-TZ-low-initial-freq_ZO-A-143-9

One last thought on this as the Zeroscillator video is much quoted when the question “what is thru-zero FM?” is raised: toggling the “Through Zero” switch on the ZO does not yield ’typical’ linear FM; normal linear FM does not sound like this: 05-TZ-not-typical

PATCH TIPS

I have concentrated on the audio effects here, but VCOs that can go thru-zero have other uses when they themselves are used as modulators. For an idea, try this patch for a thru-zero frequency shifter and listen to your sounds swap stereo sides.

I hope this explainer helps you with your TZ-FM experiments. The files folder is here. If you’re not sure about the analogue results you’re getting and need a digital ’control’, download the Clavia Nord Modular G2 demo. If you’re on a Mac and 10.7 or higher, you can run the demo under Wine. There is info here or an installer here.

Saturday, 28 October 2017

Powwow 4 - Feedback

Here’s the recording of my live set at the fourth Berlin Powwow session which you can buy from my Bandcamp.



For this performance I wanted to explore feedback and the obstacles and modifiers one can place in the loop. The key players in this were delays, filters, non-linear functions and malfunctioning components.



My main analogue patch featured a Cwejman RES-4 in a loop with a Bananalogue Serge WVX. The combination of four frequency bands of oscillation might have been enough, but placing a Cwejman VCEQ-3 in the chain to dampen or boost the feedback added another level of complexity. A stressed coupling capacitor and scratchy Folds pot on the WVX added to the unpredictability and fun.

Live, I love my Clavia Micro Modular for two main reasons: patch recall, which allows me to set a scene or chop between moods, and polyphony. The virtual feedback patches in this set were simple, but switching them to two or three voices added complexity and interest, for example asynchronous panning or the beating of multiple sine-wave oscillators. You can do it with a ’real’ modular, but at a cost!

This set up is flexible and just about portable. It’s still completely live in that each patch either has to be built or played by hand. But the addition and convenience of the Micro Modular does cause me to question how we approach playing live with a modular. With many musicians turning up to gigs with their rigs pre-patched, is there a difference or even a need for the real deal?

Thanks again to Goldwiener, Hainbach, Paul da Fonk and Mark Berman of Powwow for the opportunity to make some noise.

Wednesday, 7 September 2016

Sept 14 - Navs Live @ Modulation ICMC Utrecht

I’ll be holding a workshop and playing live at Sonar Traffic’s Modulation in Utrecht next week, Wednesday September 14th.



It’s an off-event for the International Computer Music Conference, ICMC. The builder of marvellous mechanical modules, Gijs Gieskes and the prolific performer and composer Richard Scott will also play.

My workshop starts at 19:30 and the concerts begin an hour later.

The address is Kytopia, Oude Gracht 245 and tickets cost 7,50€

The Facebook Event and ticket information is here.

METHODS OF PATCH

For my workshop I want to look into what makes music modular. Is it the sound, the organisation of sound or is it just about the gear? We’ll look at function blocks, feedback and performance patches.

I’ll then attempt to put some of those ideas into practice in my live performance! Here is a taste of what I’ve been working on for Modulation:



Look forward to seeing you in Utrecht next Wednesday!

Sunday, 1 May 2016

May 7: Wolfgang Seidel + Navs Live, G2 Patch



Fresh from our Superbooth set, I’m looking forward to another chance to improvise with Wolfgang Seidel. We are playing at Spektrum in Berlin, Neukölln next Saturday, May 7. Doors open at 19:00 and we must start by 20:00 so don’t be late!

Also on the bill at Richard Scott’s Sound Anatomy night will be the pipe-smoking professor himself in duet with trumpet-player extraordinaire Axel Dörner. They will launch their new release on the Sound Anatomy label.

Spektrum is at Bürknerstr. 12 in 12047 Berlin Neukölln. The Facebook Event is here.



Playing live electronics can be a lot of fun, especially given a nice sound system and large room. The one bane for the performer can be the amount of equipment he or she needs and, conversely, the amount of space offered by the venue. A case or two of modules, a small mixer and a couple of effects often have to be unpacked, set-up and dismantled on a small table in a short amount of time.

Frank Bretschneider’s minimal kit list for his Superbooth performance was inspiring: just an Elektron Octatrack and an external delay. Frank told me the effects box was wired as an auxiliary loop within the Octatrack. I’m not familiar with the architecture of the Elektron but saw a possible parallel with the Clavia Nord Modular G2 system.



Above is the FX framework that I’ll be using at the Spektrum gig. It means I don’t have to bring an external mixer and can control levels directly from the G2. A multiple of outputs 1+2 is sent to an external effects unit via physical outputs 3+4 and returned via Ins 3+4. I’ve set the modulation wheel to act as the FX send pot and dedicated one knob page to the virtual mixer. With a few tweaks it could easily be modified for ‘voltage controlled’ automation.

It’s not perfect as there is a momentary muting of the output when switching between patches. But I felt it was more important to have control over the main as well as dry/wet levels and ratios. This is especially important when, for example, using my gigging delay, the EHX SMMH, as a looper. Patching the delay physically between the synth and the venue’s PA/ mixer would not be as flexible.

There seems to be a drop in levels between the VA + FX sections on the G2, irrespective of any padding. To avoid overdriving the delay pedal I have additionally padded the input to the FX section by -6dB. You can switch in a 6dB boost or add some overdrive to make up the gain should you need it. Be careful of avalanches if you use the FX-FB feedback loop.

You can download the G2 patch here. Let me know how you get on. Hope to see you at the gig!

Sunday, 22 March 2015

Serge VCS Modification

Modifying the Doepfer A-171-2 Serge VCS for more extreme non-linear curves and more manual control over rise and fall times.



The Serge Voltage Controlled Slope is a classic design and an integral part of many modular musicians’ systems. The Doepfer A-171-2 is a faithful recreation of the original circuit. It works just like the Bananalogue VCS that has been in my case since pre-Maths times. That’s good, and bad.

The VCS easily allows one to set different contours for its rise and fall phases. But its non-linear curves are not as extreme as those possible with Maths. Setting times on the VCS is harder, as the useful range is limited to about 20% of the potentiometer’s throw. It’s these differences between these two similar function generators that this modification tackles.

The feedback that generates non-linear shapes is pre-wired on both the VCS and Maths. Calibrating the VCS output voltage from 5V to 8V has only a marginal effect. But if one patches the VCS envelope output to its ‘Both CV’ input with VC Rise + Fall set to linear, the Serge yields the desired curves. This suggests the internal CV feedback loop is capped.

Indeed, if we look at the left of the schematic, at switches SWF & SWR we find 330K resistors limiting the amount of feedback to the CV mixer to about 30%. If we lower this resistance we’ll get more feedback. I desoldered and replaced the 330K resistors with 200K but you could also try soldering another value in parallel e.g. 150K (= ca. 100K, 100%) or 470K (=ca. 200K, 50%).

This part of the modification helped clear up an oddity about the VCS: namely, why making the curves more exponential actually increases the overall envelope time. Negative feedback should make it shorter, and vice versa.

If we study the same part of the schematic again, we can see -12V across a 1M resistor feeding the summing points. Given the gain ratio set by the 100K resistor, this offsets the rise and fall rates by +/-1.2 volts. I find this counter-intuitive, so I removed both 1M resistors.



Both my Doepfer and Bananalogue modules are fitted with logarithmic potentiometers to manually set the rise and fall rates. This means, when using the VCS as an envelope or slew limiter, changes in the first 50% of the pot’s throw are imperceptible. Typical envelope settings lie between about one and three o’clock. Tapering the A50K potentiometers on the A-171-2 with a 5.6K resistor between the CW/ ‘hot’ lug and the wiper solves this. The useful range now spans from nine to three o’clock.



To solder these in place, you’ll have to unscrew the jacks and remove the board from the faceplate. I tape Gaffa around the ends of my pliers to avoid scratches. While you’re there, you can measure the output between the A50K wipers and the subsequent 82K resistors to understand how the log pots choke the voltage. I did try an S-curve taper with two sets of resistors but the quasi-linearization suggested here by Daverj worked best.

So, what does it sound like? Here are two recordings:

feeback mod: exp-fall, unmodified, 0:08 modded, exp-rise, 0:16 unmodified, 0:23 modded.

pot taper mod: cycling, rise = zero, fall manually altered. Stock VCS then modded at 0:39

These simple changes have given my VCS more whip and made it easier to use. Thanks to Dieter Doepfer for helping me read his PCB layout, Ken Stone for publishing his schematic, Tim Stinchcombe and Dave Jones.

If you’d like to try this yourself, take the usual precautions to avoid damage to yourself or your module. I will not be held responsible. If in doubt, ask Doepfer or your technician to carry out the modifications for you.

Monday, 14 October 2013

Mungo d0 Delay Demo

Sounds and thoughts on the Mungo Enterprises d0 dual channel delay.



The d0 can be a simple echo for audio or CVs, but it also allows the times and depth of control needed for tuned Karplus-Strong synthesis and DX7-like audio-rate phase modulation.

Here's how it sounds:



Download the EP for more recordings (basic runthru, random tap tempo, flanger, audio-rate phase mod, cv delay (envelope), comb cancellation, karplus, filtered repeats).

There's been discussion on the d0 here and the Mungo range in general here. The d0 is a quality delay but some users are frustrated with the Zoom function and a lack of documentation. The controls do take some getting used to. I'm grateful I got to try the module first, buying it 2nd hand locally. jnlkrt, outlines most of the d0's quirks here. Bear these in mind to get the best out of it.

Here are some of my thoughts:

The Zoom function is essential and should not be sold as an optional extra. Because of the way it works, the panel knobs are not always WYSIWYG. It took me a week to get a feel for Zoom: switch down to get into the right zone, mid for 'normal' changes, up for fine tune.

Once you have zoomed a parameter, the knob range becomes 0 to 10, even if it is nominally -5 to 0 to +5 like the bi-polar controls. So, if you have selected a zone around plus 3, when you release the Zoom switch the knob covers that range from fully CCW to fully CW.

The slew setting influences the delay time response. This might sound obvious, but I caught myself wondering why the delay time wasn't changing only to hear it catch up seconds later! PM sounds require a fine balance between mod depth, delay time and slew.

To gain voltage control over the slew time, null it (fully CW) and use an external VC lag like the Sport Modulator. Slewing even seemingly smooth control voltages like sine waves can have a radical effect on the end result.

I made some of the recordings in my demo before I'd located a source of noise in the d0's output. Musically, they were interesting so I kept them. When unpatched, the CV inputs and Z outs carry a DC offset. Depending on the settings (gain, feedback) this can cause crunch and clipping. For a cleaner sound, null unused inputs or use a dummy plug. A filter can be useful in the feedback path.

The build quality of the board is good, attention to detail on the panel less so. Despite having slots for the mounting screws, they are 2 mm shy of the Doepfer standard. Keyed headers on the PCB power connector are welcome, but the orientation might confuse: -12V is 'up'.



The Mungo d0 is unique in its sound and range. Other modular delays I've tried were limited by comparison. I didn't find the controls or interface insurmountable. When something odd happens in use it's usually a welcome and musical surprise. In future, I'd love to try the rest of the Mungo range at my local dealer.

Saturday, 28 September 2013

Patch Tips #26 - Let's Make an Envelope

Deconstructing the AD envelope. An extravagant but enlightening exercise in understanding how triggered slopes work.



I've been looking into the circuits used in attack/ decay envelope generators and thought it might be interesting to patch one from its basic building blocks. I took my clues from a design described by Barry Klein and René Schmitz and Ray Wilson's Skew LFO to come up with the Skew-velope. Here's how it sounds (MP3).

And here's how it works:



A trigger sets a flip-flop high. Its output is slewed. When the slew signal hits a peak threshold, a comparator turns the flip-flop off and the signal starts to fall. When that voltage hits zero volts - i.e. the envelope ends - another comparator turns the flip-flop on and the process begins anew. Feedback helps shape the envelope. Here is a PDF of the patch and modules I used. Ironically, you may find yourself turning to Maths for its secondary functions in your experiments!

So, why use 8 modules to replicate something that can be done with one? It helped me understand the characteristics of these sorts of contour generators. For example, why re-triggers are ignored during the rise phase, making use as a delay/ divider possible. It also helped demystify Maths & its Serge forbears. Analogue envelopes rely on some form of logic and switching to work. These multifunction modules make some of those processes available to the user.

For more, read Tim Stinchcombe's paper on the Serge circuit.

Saturday, 24 November 2012

Patch Tips #25 - Filters do Maths

Wave-shaping with state variable multi-mode filters, or how to integrate a square into a saw.



A while ago Josh from Toppobrillo made an aside in a forum thread that his Multifilter could be used to bend squares into saws. Infuriatingly, he never said how. Well, I love a patch challenge …

Send a square to the input of your filter and monitor the lowpass output. Wind the frequency knob back until you get something resembling a triangle. Patch the bandpass output to the CV input and start to raise the resonance. Play with the input level, amount of feedback and resonance until you get something resembling a saw. It won't have a perfectly vertical flank, but it's pretty close.



This patch works because of phase offsets between the lowpass and bandpass outputs. Positive feedback will give you a saw, negative feedback a ramp. If you increase the amount of feedback, you'll be able to generate sub-harmonics of the input frequency. If you send your pitch CV to both the VCO and 1V/O input of your filter, the saws should maintain their shape as the frequency changes.

Fonitronik mh11 ADC Pattern Sequencer

Hands-on preview of Fonitronik's novel 8-step CV & Gate sequencer.



The mh11 offers a new take on the basic sequencer concept. An analogue to digital converter generates 256 patterns. The notes and direction stay the same, but the sequence of steps that actually get played is under manual or voltage control.

For more on the concept, see Matthias' own description and video. Here's a demo of the effect of CV-ing the pattern on notes played & (0:34) gate length and (0:57) the mh11 as graphic VCO.


(edit: Bandcamp's MP3 conversion has mangled the graphic VCO example. Download the WAV.)

To understand what's happening, feed the mh11 a clock and set all step switches to the up/ on position. All steps play. Then 'mute' certain steps by setting the switch to the off position. The ADC is used to automate this muting - it generates an 8-bit string of on & off values which is AND gated with the incoming clock. To test this, stop the sequencer, set all switches down to the ADC position and turn the manual PCV pot until all lights of the pattern LED-bar are lit. Restart the sequencer and turn the pattern knob. Any incoming CV is summed with the manual offset to generate a new string of on & off values.

Programming the mh11 is easiest with another sequencer or S&H (running at a clock division) or a S&H-synchronized manual CV from Pressure Points. This is because the ADC 're-computes' the pattern with every change. You can use an LFO, but depending on the speed, things can get glitchy. At audio-rates, as per the graphic VCO example, this is not a problem. The 4MS PEG makes a good partner for the mh11 as its swings can be synced.

In use, I found a few minor issues: if fed more than 8V, the ADC can lock up. Remove the external CV and twist the offset pot to reset it. I felt this offset should be inverted so that one can start with all steps on and then progressively mute them with a +ve CV. The output CV droops slightly when passively multed, so you may want to buffer it. Finally, the ADC controls both the CV and gate signals. Muting a trigger or tying a gate also mutes the CV. So, you can't send the CV to two VCOs and have one follow the pattern and the other the master clock. I asked Matthias whether this could be changed, but quickly realized it would require a second, parallel ADC.

The build quality is solid, the layout generous and the LEDs give good visual feedback of the ADC's current pattern. A microprocessor-based sequencer might offer more options, but I do get a kick out of imaginative designs like the mh11. Thanks to Matthias for the loan of the module and for keeping it analogue!

Friday, 28 September 2012

Basic Electricity - Concert Today!

A reminder about tonight's gig with Derek Holzer, Vanessa Ramos-Velasquez and JenaMu6. The venue is the Kino on Kastanienallee 77, 10435 Berlin Prenzlauer Berg. Doors at 21:00, music at 22:00 sharp.



I won't be playing, but had some fun with this patch last night:



Inspired by the sound of Japan's Gentlemen Take Polaroids, it features a Plan B M15 VCO FM'd by Doepfer's A-143-9 QLFO. The gated sound was fed to an A-199 spring reverb with the feedback routed through Cwejman's FSH-1 frequency shifter. I added a touch of Logic's Ensemble, but 90% of the effect is the shifting reverb. Lovely.

Look forward to seeing you tonight at BE#6!

Wednesday, 11 January 2012

Patch of the Day - Highly Strung

Kicking off the new year with the rediscovery of the Doepfer A-137-2 Wave Multiplier and a frenzied take on a duet for two acoustic guitars:



I bought this module when it first came out, then sold it two years ago because I'd run out of space. I've been working on a track that needs a big fuzzy, 'super-saw' bass but wasn't getting the right sound with multiple VCOs and wondered if the A-137-2 might fit the bill. As you can hear from today's PotD, that's not what I ended up using it for: the A-137-2 will do phasing saw sounds, bar the subtle detuning, but I found it's also great for EML-sytle abrasive tones that can then be tamed with a filter.

The patch involves CV-ing the WM II at audio rate, LP filtering the result with the Cwejman MMF-1 and then accentuating various frequencies with a low-bandwidth setting RES-4. Gordon Reid goes into much detail about how to achieve this in his synth secrets, but I just used my ears. A Wiard/ Make Noise Wogglebug generated the timing and note information. It was kicked about by one channel of Maths, which received a mult of the stepped output, thus varying the pace and intensity of the ratchets and completing a timing feedback loop. I recorded two passes of the result, varying the patch by hand.

Friday, 11 November 2011

Feedback Looper

A DIY expander for the Doepfer A-112 Sampler/ Delay/ Wavetable Osc.



Since re-buying the A-112 earlier this Summer, it's become a frequent feature in my music. The one thing I wished it had was a built-in feedback function for delay duties. This can be patched, but ties up a mixer, usually a four-channel, 8HP one. This passive 4HP mixer is dedicated to that task. It also incorporates a mod to bypass the A-112's filter and AC-coupling circuit which allows one to record and process CVs.

The source signal is mixed with the output of the A-112 via resistors. Feedback is controlled via a pot. A mult of the return signal is used as the main output. You can download the schematic and extra pictures here. Experiment with the values of the resistors to get the best results for your set up. I'm sure an active circuit would have been better, but to paraphrase Nicolas Collins: if it works and doesn't smoke, don't sweat it!

As with Bitsy, I used a PCB blank, this time from MFB. Thanks to Schneidersladen for the spare Cliff jacks and Cwejman-style knobs. They're D-shaft, but that's nothing a quick blast with a drill can't solve.

Today's Patch of the Day is a jam with two feedback paths: the output of the A-112 was first sent to the A-199 spring reverb before being returned to the mixer. The oscillator was the A-143-9 QLFO, itself receiving a little feedback to bend its sine into a triangle.



DIY can be fun and frustrating but it's worth the effort, especially if you end up with a module that meets your own needs. As ever, the usual disclaimer: modding your A-112 will void your warranty, carry out at your own risk!

Tuesday, 28 June 2011

4ms VCAMatrix Demo


Pre-production black faceplate VCAM. Final version available only in silver/ aluminum.

The 4ms VCAM is a 4x4 matrix mixer containing 16 SSM VCAs, mutes and offset/ attenuation pots. For more information, click here.

4ms VCAMatrix Demo by navs

LAYOUT/ CONCEPT/ HANDLING

The VCAM looks great and is logically laid out. The mute buttons are responsive and a joy to play. The trims are not as fiddly as one might think - I can still get my large fingers in for live mixing of levels. I was worried I might get lost in the forest of knobs & switches, but it quickly becomes second nature. The routing caused some initial head-scratching, but that's more down to the possibilities than layout. The easiest way to grasp the VCAM's concept is as a standard mixer with auxes/ busses - if you do though, you might wish for more inputs: 4 aren't enough if you want to replace your external mixer at a gig. Also, this isn't necessarily the role the VCAM was designed for - the fun starts when mixing different sources.

IN USE

The VCAs sound clean, are musical when overdriven and respond nicely to audio-rate AM. The VCAM is 'louder' than my Cwejman VCAs at a setting of '10' i.e. you can get unity gain manually on the 4MS, whereas the Cwejman leaves headroom for eventual CVs.

The punch afforded by the VCAM's soft limiting is great, however, there is a flip-side to the chosen response: at lower CV amplitudes, the envelope is 'pinched' and equal-power crossfades are tricky, though not impossible.

I asked Dann of 4ms about this and he suggested using higher voltage levels for crossfading (0V-8V and 8V-0V linear envelopes). The voltage is limited past 4V, so everything below that is linear, anything above fairly constant, so dead spots are avoided. This is the easiest way to crossfade without resorting to a log- and anti-log sine. The forthcoming 4ms PEG will apparently make this process easier.

This amplitude-dependent response requires pre- or post-VCAM attenuation to match levels. This was my first surprise with the VCAM: despite its features and size, it needs some supporting modules, or, like the QMMG, you need to use other channels to get the most out of it. For example, for a gated AM sound, you might want to patch your modulator to an external offset/ attenuator like the A-183-2 or A-129-3 prior to patching it to the CV input on the VCAM. Another example might be it's use as an VC effects send mixer. Because gating happens on a per-channel input - i.e. there is no normalization - you would need to pre-gate your signals: if you gate your 'dry' VCO signal on channel 1 and then open your 'FX send' on channel 2, your signal would be a constant, un-gated tone. Depending on the patch, another solution would be to simply mult the envelope.

This is not a criticism and makes absolute sense given the VCAM's structure. To be honest, I'm sure part of this is down to the temptation to run an entire mix through the VCAM, effects and all, which might be to miss the point. The VCAM excels at feedback patches, where one might not need all four channels to generate complex sounds. Part of the fun is in the control, the other in not knowing which routing will lead to which result. Mixing different sources (audio, CVs, FX & filter loops) can lead to unexpected, sometimes chaotic, cross-modulations. 

I didn't think I could get excited by a bunch of VCAs, but the VCAM opens-up new possibilities. Having all routings in a patch in one module makes it perfect for performance and experimentation and watching sixteen LEDs glow in a grid is truly mesmerizing!



TRIMMING THE VCAM

Factory settings for the VCAM's max gain are calibrated for 'soft limiting' rather than clipping, which I find sounds very musical and makes a nice contrast to my 'character-free' Cwejman VCAs, so I'm happy to leave this trim as is.

The manual trim pot is set to give ca. -55dB of attenuation and means the corresponding LED is dim but not off, which is a useful indicator of which channels are actually muted. However, it does also mean that signals are not fully cut. This might have an effect if it is part of a feedback loop. The problem arises when the input is a CV or when the CV controlling a VCA is inactive (e.g. an un-triggered envelope @ 0V). Without muting the channel, it will continue to mildly affect its destination. For the former, the answer is to simply mute the channel. In the case of the idle CV, or if you want more attenuation, a trim might be in order.

Many thanks to Dann for a cracking module!

Friday, 10 June 2011

Doepfer A-199 Spring Reverb

With so many cool new modules being released, it's easy to overlook some of the classics. Similar to my A-156 quantizer epiphany, I've only just discovered the Doepfer A-199 Spring Reverb. Primitive though the effect may be, it's breathed new life into my system.



Here's a demo of how it sounds and some ideas for patching the feedback path:

Doepfer A-199 Spring Reverb Demo by navs

I'd tried the A-199 before, but wasn't taken by it: I guess I was looking for reverb, when I should have been listening to the effect for what it was. While on a recent hiking holiday, I came across an old, rusted gate. Because of its age and construction, opening and closing it generated wonderful, resonant/ reverberated sounds. I 'played' this gate for a full five minutes and spent the rest of the walk thinking about how one might recreate its sound. The A-199's time had come.

Today's Patch of the Day features a Cwejman RES-4, the A-199 and Metasonix R54 in the feedback path:



The one criticism that's leveled at the A-199 is its tendency to hum, but, keeping the module far enough away from the PSU and the springs outside the case, I haven't noticed this to be too bad. I'm also happy with the sound of the stock Belton tank, but if you want to change it, consult this spring reverb wiki compiled by Tim Stinchcombe for a suitable replacement.

The A-199 is a lot of fun. It can add simple ambience to sounds or be patched as a special effect. This module was the missing element in my system, adding space, colour and character - spring reverbs and modular synths seem to be made for each other.

Monday, 18 April 2011

4MS VCAM & PEG Demo



I got a chance to play with the prototypes of the 4MS VCA Matrix & Pingable Envelope Generator this past week while Dann & Jeannot were visiting Berlin. As the layout & features of both modules might change, I won't go into detail. Here's a quick, uncommented, run-through:

4MS VCAM & PEG Demo by navs

The VCAM works as you'd expect: it's a matrix mixer with the added benefit of SSM VCAs & mutes, capable of processing both CVs & audio. The LED mute buttons, in particular, would be useful in performance.

The PEG offers tempo-sync'd envelopes/ LFOs with control over multiplication or division of the envelope time, contour shaping tools and various trigger outs. With a little feedback and when run at audio-rates it can produce chaotic results.

Thanks to Dann for bringing them round - looking forward to the final versions!

Wednesday, 26 January 2011

Shifter Shootout

A comparison of two frequency shifters: the Cwejman FSH-1 and Synthesis Technology E560 'Deflector Shield'.


Two 'Klangumwandler': one analogue, one digital. One is capable of wide shifts, the other of going thru-zero.

To kick things off, here's a multi-tracked recording featuring both: 


Download the album for €1 or more to access the examples.

Internal make-up aside, the key difference between the Cwejman and Synthesis Technology modules is the range of available shift. The FSH-1 is quoted as spanning 0.02Hz to 12kHz. The E560 concentrates on lower frequencies to take advantage of the stereo effects made possible by shifting thru-zero.

Take care of your ears and speakers with these recordings!
Here's a quick manual tweak of the frequency.
(range, MMF-1 sine. FSH-1, then E560).

While the Cwejman has a switch to toggle between LFO and audio rates and a fine tune dial, the SynthTech relies on a single frequency knob with a highly-exponential response. This makes it easier to dial-in slower rates, but, as you can hear, the jump in the last 10 degrees of the pot's rotation makes it harder to set higher frequencies.

Unlike the FSH-1, the E560 is capable of thru-zero shifts, offering enhanced stereo images. Modulated with a bi-polar CV, the up & down shifts swap sides; what's up, goes down and vice versa:
(e560_thruzero, MMF-1 sine. E560, manual tweak, carrier 8).

Due to it's highly exponential response and clamped range, the E560 seems happiest at slow rates, producing lush tremolo effects. Here's an example, isolated from the first recording:
(e560_slow, RES-4. E560 carrier wave changed near end).

By contrast, the FSH-1 will track higher changes:
(hitrack, MMF-1 sine, CV to FSH-1 then E560).

This opens up timbral possibilities which, given a suitable offset, can sound similar to linear FM:
(fsh-1_tone, MMF-1 sine, FSH-1. 50-50 mix. Eos reverb).

These last clips show what's possible when putting a FS in the feedback path of a delay:
(e560_fsdelay, EHX SMMH, E560 plus feedback).

Carrier bleed is the bane of the analogue FS. The E560 does not suffer from this. The FSH-1 quotes good carrier suppression, but I initially couldn't get the above patch to work. The more feedback I introduced, the louder the howl of the carrier. I asked Wowa Cwejman who suggested calibrating the FSH-1 to my system/ power supply. Two trim-pot tweaks later and the carrier was as good as gone:
(fsh-1_fsdelay, EHX SMMH, FSH-1).



The build quality of both modules is excellent. The Cwejman has attenuators for its inputs and a VC-able up/ down mix output. The SynthTech has a built-in feedback path and dry/ wet control. To my ears, the FSH-1 has the superior sound, but it is almost twice as expensive. The E560 offers thru-zero shifting but, in practical terms, is limited to low frequency shifts. Both modules have a ring-mod mode, offering out-of-phase outputs for extreme panning effects. The E560's phaser mode might not be as pronounced as a dedicated unit like the SPH-2, but it is a nice bonus. The FHS-1 can also be pressed into phaser-like duties by mixing dry and wet signals and introducing some single sideband feedback. The E560 alone offers morph-able carrier waveforms, a unique feature in a hardware FS.

Thanks to Paul Schreiber and Wowa Cwejman for taking the time to answer my questions and to Schneidersbuero for the loan of the modules.

Sunday, 21 November 2010

Leaf Audio Fuzz-O-Mat & Kenny's Death

A demo of Leaf Audio's DIY distortion-in-a-snackbox effect.



Described by its makers as a 'lethal lash', this deceptively simple circuit is capable of serious audio destruction. It features three gain stages, two feedback loops and adjustable power starve. It was originally designed by Leaf Audio to process electronic beats although, as you'll hear below, it's quite happy when fed with other material.

Despite its diminutive size and innocuous looks, the Fuzz-O-Mat is capable of dramatic gain swings, so be careful of your ears and speakers! I've used a limiter on these recordings to keep the levels in check.





The Fuzz-O-Mat is only available by taking part in one of Leaf Audio's workshops. The kit contains everything you need and the PCB is well laid out, making it fun to build. Manuel of Leaf Audio and Matthias of Curetronic are on hand to help should you get stuck.

Check the list of upcoming dates and their other 'snack-box synths': the BingBong, NoiseFuzzFilter, RingDing & Bumssss analogue drum synth.

The next workshop in Berlin is on the 4th December at the Haus der Kulturen der Welt as part of the Worldtronics festival, where you can also look forward to a modular set from me, quite possibly shredding pristine Cwejman sounds with my Fuzz-O-Mat.



If you can't take part or would like something pre-built, head over to Kenny's Death and contact Manuel to order "the most kaputt sounding fuzz workstation ever" - a Fuzz-O-Mat with all the Hazarai.

Sunday, 18 April 2010

Patch Tips #8 - More Feedback



Getting the Plan B M12 SVVF to self-oscillate and 'sine-shaping' à la Bubblesound µLFO. An update to this post and part of my ongoing drive to sell the Doepfer A-133 VC Polarizer.

If you've read that post, you'll know how I go about this so, without further ado, here's the Plan B M15 sine being fed back to varying positive and negative degrees:



And here it is being used as a modulator:



I don't have a µLFO and don't know the Bubblesound circuit, but this certainly seems to yield similar results:



I'd be interested to hear from any µLFO users whether the sine-shaping also causes a change in frequency as per my examples.

Feedback with the Model 12 yields some very interesting results! Depending on the amount of feedback, internal resonance setting and input gain, I got some wonderfully wild sounds. This is the bandpass output being fed-back negatively:



Part of the sound is down to clipping on the input circuit as you can see from these 'scope shots:



Surprisingly, I found that it is possible to FM the M12 at audio rates, although of course not with the precision or clarity you'd get with a non-vactrol-based filter:



The sine output of the M15 was used to FM the M12. The output of the filter was also sent to the sync input of the VCO, resulting is some pleasing, if groggy, harmonic stepping.

Thursday, 28 January 2010

Patch Tips #2 - Doepfer A-133 VC Polarizer



As you might have gathered, I'm a fan of Doepfer's A-133 VC Polarizer. It's neither flash nor expensive but it's often overlooked. This is a shame because it's a very flexible and compact utility module that could be useful in any Euro-rack system.



The A-133 comprises two voltage controllable DC-coupled ring modulators or bipolar VCAs. It can process both audio and CV signals which can be inverted, boosted (up to 2.5x) or attenuated. Two handy LEDs show the level and polarity of the output.

It can be used as a standard linear VCA but also to flip a signal from +ve to -ve. This can have a dramatic effect on modulation sources in a patch, particularly when using a bipolar random signal to VC the polarity. Processing two audio-rate signals results in ring modulation. The nice thing about using the A-133 for RM is the fact that you can set the intensity/ colour of the effect. Chain both units to gain voltage control over the modulation depth.

The A-133 can also be used as a cross fader. Take the two signals you want to cross-fade and patch them to the ins of units 1 & 2. Set the manual offset of the top unit to ca. +2 and the bottom unit to ca. -2. Take an LFO and mult it to the CV ins of both units. Take the outputs of both units and feed them into a mixer. When the LFO is positive you'll hear the output of the top unit and when it's negative, you'll hear the bottom output.

Anyone who has Maths, needs an A-133 to gain voltage control over its contours. As outlined in Patch Tips #1, non-linear shapes can be achieved by introducing either positive (log) or negative (exp) feedback into Maths', or indeed any VCADSR or VC LFO's CV input. You could also use the A-133 in a feedback patch with a filter to gain voltage controlled resonance.

My favourite use for the A-133 is rather more mundane: it's a handy, if basic, voltage meter! Great for checking whether you are actually getting a signal out of a module, what its polarity is and how fast it's swinging.

Hope this helps you understand the A-133 a little better. As I say, it's not flash, but I'd be lost without it.

Friday, 22 January 2010

Patch Tips #1 - Maths Slope Control



First in a new series of tips and tricks, recapping some of the ideas I've covered in Patch of the Day.

It should be fairly obvious by now that I'm an envelope junkie. Of the eight different EGs I have or have had in my system, one of my favourites remains Doepfer's A-143-1 for its natural, rounded 'sound'. It's not the fastest transient generator in my rack, but it twangs a low pass gate like no other. Part of the reason for this is its logarithmic rise and exponential fall:



The only problem with the A-143-1 is that it's large, lacks voltage control and, to be honest, I rarely gang its four envelopes to form one complex CV. I'm running out of space so I wanted to see if I could get the same response out of Make Noise's Maths which, on the surface only offers control over the contour of both rise and fall simultaneously:



With some creative patching, however, it is possible to gain independent control of Maths rise and fall curves, without the need for other modules. Much like the Bananalogue/ Serge VCS, all that's called for is a little feedback:

Set Maths' response knob to linear/ noon. Take two mults of the envelope output and patch one to Maths' channel 2, the other to channel 3. Set channel 2's output to about two o'clock (+) and patch it to the rise CV-in, set channel 3 to ca. ten o'clock (-) and patch to the fall CV. This will give you a logarithmic rise and exponential fall:



Increasing the amount of positive or negative feedback will increase the severity of the response, flipping the polarity to the CV-ins will yield an exponential rise and logarithmic fall. If you want to go really mad, use Doepfer's A-133 Dual Polarizer instead of Maths' 'attenuverters' to gain voltage control over these parameters.